Explore: Steels (firearm Components)

In firearms terminology and law, the firearm frame or receiver is the part of a firearm which integrates other components by providing housing for internal

utilize welding equipment, minimizing dependence on firearm-associated components, minimizing steel drilling, minimizing felt recoil, enhancing the reliability

around the printing of open-source firearm frames and receivers, the use of standard, metal commercial components (like an action and barrel), and other

of pressurized gases, firearm parts, clutch and flywheel components, and roll cages. 4150 stands out as being one of the steels accepted for use in M16

driver A term used in the firearms industry to a firearm regardless of form one is trying to promote. Tapering Firearm components that narrow down to a conical

than austenitic stainless steels. Duplex stainless steels have roughly twice the yield strength of austenitic stainless steel. Their mixed microstructure

individual components of the mechanism are mounted either side of a single plate. The assembly is then mounted to the stock on the side of the firearm. In modern

A gun barrel is a crucial part of gun-type weapons such as small firearms, artillery pieces, and air guns. It is the straight shooting tube, usually made

The hammer is a part of a firearm that is used to strike the percussion cap/primer, or a separate firing pin, to ignite the propellant and fire the projectile

Warfare, use a metallic chassis which securely beds the functional components of the firearm, with non-structural polymer panels attached externally like a