Explore: Receiver Ring

diameter of the M98 system receiver ring was also enlarged to 35.8 mm (1.41 in) diameter compared to previous Mauser "small ring" bolt-action designs that

gas venting, better receiver metallurgy, and a larger 35.8 mm (1.41 in) diameter receiver ring compared to previous Mauser "small ring" bolt-action designs

which extends behind the rear sight and ends just in front of the receiver ring, although this feature exists on other models as well. The M48 was designed

stock has a straight wrist and a handguard which stretches from the receiver ring to the lower barrel band. The upper band has a lug for the Model 1895

German Gewehr 98 and most subsequent bolt-action rifles. The forward receiver ring diameter where the two forward locking lugs achieved lockup is 33 millimetres

scrubbed from the receiver and replaced with the Yugoslavian communist crest and the marking "Preduzeće 44" on the receiver's ring. In addition to this

the receiver ring was marked with the symbol of the Mukden arsenal, and the serial number of the gun was placed on the left side of the receiver ring. Chiang

a "small ring" design similar to that found on the German Karabiner 98AZ issued during World War I. As the name implies, the receiver ring is of slightly

handle is at the rear of the bolt body and locks behind the solid rear receiver ring. The Mosin bolt handle is similar to the Mannlicher: it is attached

M1903's forward receiver ring diameter is 1.305 in (33.15 mm), slightly over the 33 mm (1.30 in) ring diameter of the older "small ring" Mauser models