Explore: Impedance Convertors

electrical engineering, the output impedance of an electrical network is the measure of the opposition to current flow (impedance), both static (resistance) and

electrical engineering, impedance matching is the practice of designing or adjusting the input impedance or output impedance of an electrical device for

impedance, Z, normalized by the reference impedance, Z0. The impedance Smith chart is then an Argand plot of impedances thus transformed. Impedances with

high impedance bridging, voltage bridging, or simply bridging connection is one in which the load impedance is much larger than the source impedance. The

A quarter-wave impedance transformer, often written as λ/4 impedance transformer, is a transmission line or waveguide used in electrical engineering of

Impedance cardiography (ICG; also called electrical impedance plethysmography, EIP, or thoracic electrical bioimpedance, TEB) is a non-invasive technology

regulate temperature Impedance inverter, a device that produces the mathematical inverse of an electrical impedance—see Quarter-wave impedance transformer Inverse

Electrical impedance tomography (EIT) is a noninvasive type of medical imaging in which the electrical conductivity, permittivity, and impedance of a part

in circuits are used to lower voltage, dissipate power, and to improve impedance matching. In measuring signals, attenuator pads or adapters are used to

component. In the simpler versions of this instrument the impedance was measured internally and converted for display to the corresponding capacitance or inductance