Explore: Charge Pump Circuits

A charge pump is a kind of DC-to-DC converter that uses capacitors for energetic charge storage to raise or lower voltage. Charge-pump circuits are capable

integrated circuit (IC) usually called a charge controller IC or charge control IC. Charge controller circuits are used for rechargeable electronic devices

output of a full or half wave rectifier. They can also be used in charge pump circuits as the energy storage element in the generation of higher voltages

side, the circuits have a charge pump (a small gear pump) that supplies cooled and filtered oil to the low pressure side. Closed-loop circuits are generally

also reduce ripple but at the expense of charging time and increased diode current. The Dickson charge pump, or Dickson multiplier, is a modification

be used in such a circuit, but in integrated circuits MOSFET devices are frequently employed. Another basic concept is the charge pump, a version of which

Warp Charge Pump Express (MediaTek) Super Flash Charge (Vivo, 2020 onwards) – interchangeable with SuperVOOC, DART, and Warp Charge SuperCharge (Huawei)

Electronic–hydraulic analogies are the representation of electronic circuits by hydraulic circuits. Since electric current is invisible and the processes in play

the pump uses, three sodium ions are exported and two potassium ions are imported. Thus, there is a net export of a single positive charge per pump cycle

Charge-pump phase-locked loop (CP-PLL) is a modification of phase-locked loops with phase-frequency detectors and square waveform signals. A CP-PLL allows