Explore: *video Signals

signals and eliminate these artifacts from composite sources. S-Video and component video avoid this problem as they maintain the component signals physically

naked eye, video encodes images electronically, turning them into analog or digital electronic signals for transmission and recording. Video was originally

video". S-Video, RGB and YPBPR signals comprise two or more separate signals and thus are all component-video signals. For most consumer-level video applications

superior for signal processing and standard-definition TV was broadcast over NTSC composite signals. Standard analog television signals go through several

include unwanted signals conflicting with desired signals (crosstalk). The reduction of noise is covered in part under the heading of signal integrity. The

are made for displaying interlaced signals. Interlaced scan refers to one of two common methods for "painting" a video image on an electronic display screen

A video signal generator is a type of signal generator which outputs predetermined video and/or television oscillation waveforms, and other signals used

Analog television, the original television technology, uses analog signals to transmit video and audio. In an analog television broadcast, brightness, color

information in video signal. The combined signal is called radio-frequency signal. At the end of this transmitting system, the RF signals stream from a

Audio connectors and video connectors are electrical or optical connectors for carrying audio or video signals. Audio interfaces or video interfaces define