Downloads & Free Reading Options - Results

The results are reported of the research on the viscous interactions effects on transonic airfoil design and analysis. The boundary layer methods and the design program are discussed.

This report covers the period 1 September 1983 to 31 January 1984. The primary task during this reporting period was the continued development of the massive separation model and computer code (SKANSEP). In particular, detailed investigations were conducted with the boundary layer displacement surface correction technique discovered near the end of the last reporting period. This report will present detailed results using this technique and show comparisons with experimental data.

A body-fitted grid embedment technique applicable to inviscid transonic airfoil flow field analysis was developed and verified through a series of tests. Test cases used to verify the technique show that the accuracy of the solution was increased by grid embedding. This enhancement of the solution is especially true when small supercritical zones occur which cannot be adequately described using the main grid only. Results obtained with the SKANFP full potential program are considered with regard to the massive separated flow and high lift and the undesirable unrealistic 'bump' in the vicinity of the separation point due to a mismatch between the unseparated and separated pressure distributions. Techniques used to eliminate this feature are discussed.

The development and incorporation into TRANDES of a fully conservative analysis method utilizing the artificial compressibility approach is described. The method allows for lifting cases and finite thickness airfoils and utilizes a stretched coordinate system. Wave drag and massive separation studies are also discussed.