Downloads & Free Reading Options - Results

QS/1 hosted a breakout breakfast discussion at the PDS Super Conference in February. ComputerTalk Magazine's Maggie Lockwood moderated the discussion with the panel and took questions from pharmacists who were attending. Here is a wrap-up of some of the topics on the minds of pharmacists.

This episode features Lindy Fishburne, Managing Partner of Breakout Ventures. Here, she discusses Breakout Ventures, private equity trends, leadership advice and more.

Source: https://www.twitch.tv/videos/2221504205 Uploader: Lost

A backup of the "Arena Breakout Wiki" wiki (database name: arenabreakoutwikiwiki ) on Miraheze , self-generated by Miraheze itself every month to honor our backups commitment.

A backup of the "Arena Breakout Wiki" wiki (database name: arenabreakoutwikiwiki ) on Miraheze , self-generated by Miraheze itself every month to honor our backups commitment.

A backup of the "Arena Breakout Infinite Wiki " wiki (database name: arenabreakoutinfinitewiki ) on Miraheze , self-generated by Miraheze itself every month to honor our backups commitment.

Ben talks about Mike Trout, Paul Blackburn, and Ezequiel Duran.  To not miss out on episodes, subscribe. If you want to email the show any questions, asks, or comments, email [email protected] and include name and comment. For more podcasts, you can check us out by going to anchor.fm/endzone or anchor.fm/laughlinepod. If you're interested in sponsoring, use the same email as above and don't forget to include company name. For additional info and transcripts, those are unavailable at this time. If you want to join the show, talk to Ben in person or email the email above. Other info will be on website or in podcast descriptions. Thanks!

Ben talks about Mike Trout, Paul Blackburn, and Ezequiel Duran.  To not miss out on episodes, subscribe. If you want to email the show any questions, asks, or comments, email [email protected] and include name and comment. For more podcasts, you can check us out by going to anchor.fm/endzone or anchor.fm/laughlinepod. If you're interested in sponsoring, use the same email as above and don't forget to include company name. For additional info and transcripts, those are unavailable at this time. If you want to join the show, talk to Ben in person or email the email above. Other info will be on website or in podcast descriptions. Thanks!

phot for a vlog entry

Brainwashed Youth | BREAKOUT

This remix has an opening for a commonly used 1.3" OLED-Display. Fixing can be done by a drop of glue or smoothly push of a soldering iron into the plastic pins.

This was an opportunity for the public to learn more about the proposed 2021-22 budget and to ask questions and engage with the TPS Board of Directors, administrators and staff. This webinar is focused operations, and health and safety, two of the five strategic plan goals, which the district uses to guide budget development.

Source: https://www.twitch.tv/videos/2223220918 Uploader: Dhalucard

The Denver Climate Action Task Force has come together to make recommendations to strengthen Denver’s work to address climate change equitably in the following critical areas: Buildings, Transportation, Electricity Generation, Industrial Energy Use, Consumption Emissions and Resiliency/Climate Adaptation. Some meetings have smaller breakout sessions to discuss specific topic areas. This is a recording of one of those smaller breakout sessions. All recordings are posted to the City & County of Denver’s Office of Climate Action, Sustainability, and Resiliency Page at denvergov.org/climatestakeholder.

The Denver Climate Action Task Force has come together to make recommendations to strengthen Denver’s work to address climate change equitably in the following critical areas: Buildings, Transportation, Electricity Generation, Industrial Energy Use, Consumption Emissions and Resiliency/Climate Adaptation. Some meetings have smaller breakout sessions to discuss specific topic areas. This is a recording of one of those smaller breakout sessions. All recordings are posted to the City & County of Denver’s Office of Climate Action, Sustainability, and Resiliency Page at denvergov.org/climatestakeholder.

The main Board of Regents session is available at https://youtu.be/7HZeGxrkOHg

Breakout Construction Kit (1988)(CP Verlag)[cr BB]

New Jeans

Friends, thank you for joining us again for the Retro Radio Memories Podcast - although this week I suppose it should be called the Retro Records Podcast as we are sharing 1982's The Story of Super Breakout in honor of Atari Day!

The Break-Out game in ONLY 4kB; 4 levels, 3 balls, score etc. Text mode domination!

Tracklist: 1. It's Too Late 2. Workin' On A Groovy Thing 3. Never Can Say Goodbye 4. Blues Selah 5. Breakout 6. It's Too Late (Live)

For use with Breakout EDU. Print chips in whatever colors you wish. Print Key white or light colored and use Sharpie or paint to color the dots to match the lock combination. :Hide just the necessary chips or add a few extras (different colors, of course!) for additional challenge! I've only made number chips so far but this would also work with letters or symbols! Credit goes to BreakoutEDU member Jeff Hennigrant for the Breakout Logo and to Thingiverse member Belfry for the bottom half of the key, Thing #52761 . Feedback welcome. Encouraged, actually! How could this be better?

The prompt emission of low-luminosity gamma-ray bursts (llGRBs) indicates that these events originate from a relativistic shock breakout. In this case we can estimate, based on the properties of the prompt emission, the energy distribution of the ejecta. We develop a general formalism to estimate the afterglow produced by synchrotron emission from the forward shock resulting from the interaction of this ejecta with the circum-burst matter. We assess whether this emission can produce the observed radio and X-ray afterglows of the available sample of 4 llGRBs. All 4 radio afterglows can be explained within this model, providing further support for shock breakouts being the origin of llGRBs. We find that in one of the llGRBs (GRB 031203) the predicted X-ray emission, using the same parameters that fit the radio, can explain the observed one. In another one (GRB 980425) the observed X-rays can be explained if we allow for a slight modification of the simplest model. For the last two cases (GRBs 060218 and 100316D), we find that, as is the case for previous attempts to model these afterglows, the simplest model that fits the radio emission underpredicts the observed X-ray afterglows. Using general arguments, we show that the most natural location of the X-ray source is, like the radio source, within the ejecta-external medium interaction layer but that emission is due to a different population of electrons or to a different emission process.

Made it easier to print, and fixed a lot of hollow meshes. In other words, there is a lot of UNDER THE HOOD changes, ahahahahahahahahahahahahHAHAHAHAHAAHAHHAHAHHAHH!H!!!!!1!111 ...yea

This is designed for managing your Talon SRX ribbon cable by folding it like a accordion with a breakout board on top secured by a small ziptie. Uses the cover holes already on the Talon with the same screws. Made by FRC Team RUSH 27.

Reigning on Earth's Climate - Only about 70% of the solar energy that reaches Earth is absorbed, while the other 30% is reflected back into space by atmosphere and aerosols, ocean/land and clouds. A closer view reveals a delicate balance between absorption and reflection as well as a release of energy by rocks, air and sea warming and emitting increasing amounts of thermal radiation (heat) in the form of long-wave infrared light. This radiation allows Earth to lose heat at the same rate it gains from the Sun. Evidence is in the land/ocean interaction, the absorption of energy by clouds, water vapor and the greenhouse gas ozone, as well as the 20-24% absorbed and emitted back by clouds. Note: This animation illustrates a close up view of Earth's incoming solar energy budget. Animator: Susan Twardy (HTSI).

This project was made in order to use the original cover Kobo mini. The frame is 6 mm. increases the volume for additional battery. Attention!!! This model was not yet in 3d printing.

This week on Breakout, we're looking back at Elden Ring which launched one year ago this weekend and has now sold a whopping 20 MILLION copies. Featuring Nick Calandra, Marty Sliva, and KC Nwosu, the freeform podcast dives into a bit of our daily lives, the latest games, movies, tv shows and books, the occasional craft beer review and random topics we find interesting. Join YouTube Memberships and support our content for Early Access to new videos, exclusive Discord perks & more for just $2 per month ►► https://www.youtube.com/channel/UCqg5FCR7NrpvlBWMXdt-5Vg/join Join our growing Discord community: https://discord.gg/A6T2gKrDwB Subscribe to Escapist Magazine! ►► http://bit.ly/Sub2Escapist Want to see the next episode a week early? Check out http://www.escapistmagazine.com for the latest episodes of your favorite shows. --- --- The Escapist Merch Store ►►https://teespring.com/stores/the-escapist-store Join us on Twitch ►► https://www.twitch.tv/the_escapist_official Like us on Facebook ►► http://www.facebook.com/EscapistMag Follow us on Twitter ►► https://twitter.com/EscapistMag

Backgammon & Tvision & Yachtc & Missile Command & 3D Breakout & Cosmo II (19xx)( )

This is the display plaque seen in the Collector's Fortress at Guardians of the Galaxy- Mission: BREAKOUT! at Disney California Adventure. All the items in the Collecter's Collection have these display plaques that give information about the object. There is a blank version of the plaque that can be customized, and also all the pieces in separate files for multicolor printing. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/aGg33b8iUdl

Case for the "LinkIt Smart 7688" breakout board by seeedstudio.com An instruction how to build an image for the device is available on [Github](https://github.com/hosac/openwrt-source/tree/openwrt-19.07-linkitsmart7688breakout)

This study was undertaken to determine DOD and Marine Corps objectives and requirements for replenishment spare parts breakout, analyze current directives and procedures, and to prescribe a comprehensive approach for implementing an effective replenishement spare parts breakout program at Marine Corps Logistics Base (MCLB) Albany, Georgia. During the course of this study it was found that (1) the DAR Supp. 6 DOD Replenishment Spare Parts Breakout Program is focused on actions during replenishment while effective breakout is dependent on actions early in the systems acquisition process; (2) DAR Supp. 6 does not provide guidance for acquisition personnel whose actions are crucial to effective breakout; (3) the DAR Supp. 6 breakout process sufficiently captures the factors in the breakout decision but is too complex, and is inefficient for day-to-day use by breakout technicians. The major contribution of this thesis was the prescription of an effective replenishment spare parts breakout program for MCLB Albany, Georgia. Additional keywords: Weapon systems; Military procurement.

Hi All, Here we have a Breakout box for a 4 pole speakon socket to induvial 4mm banana Sockets. It should not matter what 4mm Banana sockets you use, providing they have an 8mm mounting hole. I have a link the ones I use: https://www.ebay.co.uk/itm/Banana-Chassis-Panel-Socket-4mm-Female-Speaker-Connector-Red-Black-x-10-Pairs/224030964669?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 For the 4 pole speakon connector I used the following: https://www.ebay.co.uk/itm/10pcs-4-Pin-Speakon-Female-Jack-Socket-Connector-Audio-Loudspeaker-Amplifier-Fs/193570028902?_trkparms=ispr%3D1&hash=item2d11ac3d66:g:1fQAAOSw1g9Zo~gZ&amdata=enc%3AAQAFAAACcBaobrjLl8XobRIiIML1V4Imu%252Fn%252BzU5L90Z278x5ickkfKe2vUidqHRg3XM2X2xOVESfdT5PM55pvA9xWCwL547IXAcPyOZKDg28FqSJp6MikPUUDsvX%252FqTNLc5fCso%252FpdWJztwJourlKowu%252BIVyzAqy6iOJeYOffZYY0Q21Bb9PWwIi5PCaRhzCqhqxbsVz1LoHPxBFIS7bkjSEjHgyE0fkwGr%252BL32%252Fl07Tw%252B32wN8s6nqutl2vetlO46fOcgDLtu7kA1qOCgH0QNHThfu58i5iACC%252FvlNalyJT5cpBU%252BpyAZ7w7mJu698VNcbOgNR0qIrFz%252BFDTt0HF6OaCw%252FGcYGVFbxXPFfdX4TFhbYAb09GetzlgBaV5txswb0NCuWdj6VEIEbzmNInthSgi3Y8gVLmzTHfjg68zwhaSBna8F7zcuXhOrwjZEj9SghA5KD8v2aH542kei98WazME7RmrUGRSdn2mHzU%252Bw6W4GxD1ETGHZC3QYUXfxEmVIgCMjjbpxacMoOv%252Fl6JNhxLf0uPnZXNtHpeubFW%252BgVLN%252BD3855zpR%252BNKa9hhejBh0C7HuEl7C0EWd%252FIYxFP7WcTMQ6uMbz6YF1pLYII1BypfxLEpOQPMzB%252BOkD5l947sG7T6WUuDi%252FHrCAd8%252FDXe81fCJWvlF9fJjBVI7vfz%252FfjL8mxOTpHkH1TDtN3qk2yH7QV393UjyHsbPNCyqVu6Om0PQk1ygO6GOd8jMmyE7%252BNNfDenBPT2WNjCcTIer9Gk%252FEKc%252BN0elwemCLPRC%252FsC7Nmxixo19JdVd8gqENyivVPKld66yHdnXSoyws%252FlDTNIw3tbrd7aw%253D%253D%7Ccksum%3A19357002890207d511bd7c644da1b540bc56bf27d0b1%7Campid%3APL_CLK%7Cclp%3A2334524 For mating the two parts I used M3 threaded brass inserts. I also have a link to the ones I use: https://www.ebay.co.uk/itm/THREADED-BRASS-INSERTS-FOR-PLASTIC-SOLID-PRESS-FIT-METRIC-BARBED-M2-M3-M4-M5-M6/192514339545?var=492602030976&_trkparms=ispr%3D1&hash=item2cd2bfb2d9:g:OVsAAOSwPcBbLOuh&amdata=enc%3AAQAFAAACcBaobrjLl8XobRIiIML1V4Imu%252Fn%252BzU5L90Z278x5ickkfKe2vUidqHRg3XM2X2xOVCSRJU7xmJRz4aEHaomt31v%252F0dJHVOYZYWeZAm6W5xdQfhuiwfpmy2h8uwwczQfffnD74Zp%252BLKnG6FPUK3IBH9uAg6sqwQsebIaXs1awYfuB5FbgYfgYrudFXndEzdz0QzJEcaajb729g%252FlkCfuHlI98j268BtL9bJOildNhq5saYsMDBhRP3pB44swIQjjsPaUJSOi25x3%252Bl4yn6ChpSHsCIru8h23zLD1lpFXaOX29lfLSzr9BYUPNP9LkmCyM9ASNjpzDxthGHVUzwJMpanYNCFjNauRHLcJif1zD1PifncSb61uC2Op%252BCCWT0xp6Ry7lcUrKjnviS215jiRbcAeTNnvCy1i30PdhdIBBbMb9fgcuj4NHYxgoZ3gR4JCNEevB091H3dnd%252BH%252BgZZmvuRPPl%252Fd5830akXWn79GfHolsqzs%252FDwGiQdunNyx2nHIrJ9VuYfaZpXJnsalSCTZJn%252FupYyIHMEzLiWTuLLsf%252FAKmOZXBNtz29VIAZ%252B6DwXizkuKW29GjuQCuKxwB0mTMNPu0SNfoY9n233R0%252BfFVYbsFCzLjPqiUvnPF43Addwn5mUcHPfdvshg%252BYFo7UMBnj%252Fxhvrww1Q%252FBsFSgDgXl6UAbZUdyJB9VhqyfbpI4X7SRamDhDSwgWul7a6023E1BWHPZfnhWlolfpE3pLJ4eSDIrAfjBZjCQ5TaudtJiKePTt3vjXLsPRVPcruC8BTFRhMOucpcRcfxdG%252BToUO8r7exGebCVJvc9LESn8t0OCBA3IQ%253D%253D%7Ccksum%3A1925143395459b9d52b14f6c496894481fa2a398800a%7Campid%3APL_CLK%7Cclp%3A2334524 And for the bolts, I used M3 countersunk machine screws about 8m long, once again any countersunk screw can be used, providing the screw is not too long (say over 10mm) any more will be unnecessary and might interfere with components. https://www.ebay.co.uk/itm/M3-M4-M5-M6-COUNTERSUNK-BOLTS-ALLEN-KEY-BOLT-SOCKET-SCREWS-A2-STAINLESS-DIN-7991/383694614499?_trkparms=ispr%3D1&hash=item5955fb2fe3:g:yH4AAOSwMFVfR8~w&amdata=enc%3AAQAFAAACcBaobrjLl8XobRIiIML1V4Imu%252Fn%252BzU5L90Z278x5ickkxFtV7J5P58ubuVigtBH%252Fe8U5UO3%252BUqPja78SJxxnTUAtH3H0J6R4RysGxVHvTZ%252F8hW%252F5McLW437aMs9WL9AUoCg3cqqGm8dFh2EE25gzvTadHuZuPR53l8P%252Fb4fPHO%252FYU7%252BS2jUQ4V2P5VKqQCuJZoejS7VJE5hsbGOBRJERdeYJah1E1%252F95hbtHLIJJ9qyY%252FnF5GHNoXroX0%252BEHap5lr1vDcf8K2pxW7D2svtKWrh%252BJ4JiDQL2lDXo0pi%252BYjQVFKEX%252Fw%252BHNp3B%252FFoj29GFx%252Frly8eDYp7gjR%252Fro3ABIIn9yLnIbsH8%252BbNcsHcP24Av26kbe5oNic9q3wKwp0iWnekDifVJNdOtcwvYuyZBdOQrbiTj381l7zTeLoDu93S9iVsNz355Ptx42cysK%252BP6flzIvBsSppjpu5BOXcnxsDC1ASvNDJUCi%252FGC2koGUGMiIEKUphEjXUFRq%252FzDG7dgaAVOidc9JHgRYYMqT0hj2XsS1ovS4emknV4rpta4Q90kGVt4sJ2I2kf3V3po9%252B3t4T6cnIL%252F1HaxxytHBm47H925im1jhz0w8NDJEkUEzHOycN6Ix%252B1Bsu6uSo3a4X5Laa2r1Ry9ny3C3L%252FDag4QAC%252BFNqf3UWWNAYg4nk1bNnRDstJa2b0crVpMVLzEwqOMdxcivwgsxOfRWxVD8pr0WJIbihDJpDGGQzp2EAi6HvO2sb6LIWeb%252Bm%252F9dwhtkeA6G0iFGowW4s12A5j%252B5v7y05UYdYfhQAbZsH7OYQMTsWhgcBJF8HkQhcIw2RpEcH7rzYw%253D%253D%7Ccksum%3A383694614499b12adce24ee14b4a96c5c5bbcd8cc29c%7Campid%3APL_CLK%7Cclp%3A2334524 If you can post your makes It would be great to see them. Thank you, and happy printing. James

After we got solar, they replaced my main feed from the top through the bottom, leaving a 3 inch hole at the top. I have some extra circuits I'd like to add, but needed additional punchouts---well this solved both problems! It snaps in pretty tight, but if you're really wanting it never to move, just glue it into the box and you should be set.

Overview ======= This is a printable box designed to hold one of the sensor breakout boards I designed for my ESP ports of the BrewPi firmware. This box contains the sensor breakout PCB (with attached sensors) allowing you to place the sensors closer to your fermentor (including inside your fermentation chamber if needed). This box is intended to be used with one of two PCBs: RJ-45 Sensor Breakout Board: https://PCBs.io/share/zOEWW RJ-11 Sensor Breakout Board: https://PCBs.io/share/r16lD Bill of Materials ============ * 1x PCB (links above) * 5x M3 x 12 Pan Thread Machine Screws * 3x M3 3mm Hex Nut * 2x M3 Square Nut * 1x Small Zip Tie Assembly ======= 1. Solder all components onto the PCB 2. Inser the PCB into the case with the RJ-45/RJ-11 jack sticking out the front, and feed the cables through the back 3. Insert 3 of the screws through the holes in the back of the case, and thread them through the PCB 4. Screw the 3x hex nuts onto the screws to secure the PCB to the case 5. Attach the lid to the top of the case by inserting the tabs into the holes on the case body 6. Insert the 2x square nuts into the holes on the front of the case body 7. Screw the remaining 2 screws into the holes on the case top, threading them into the square nuts previously inserted in the case body. Do not overtighten!

Overview ======= This is a printable box designed to hold one of the sensor breakout boards I designed for my ESP ports of the BrewPi firmware. This box contains the sensor breakout PCB (with attached sensors) allowing you to place the sensors closer to your fermentor (including inside your fermentation chamber if needed). This box is intended to be used with one of two PCBs: RJ-45 Sensor Breakout Board: https://PCBs.io/share/zOEWW RJ-11 Sensor Breakout Board: https://PCBs.io/share/r16lD Bill of Materials ============ * 1x PCB (links above) * 5x M3 x 12 Pan Thread Machine Screws * 3x M3 3mm Hex Nut * 2x M3 Square Nut * 1x Small Zip Tie Assembly ======= 1. Solder all components onto the PCB 2. Inser the PCB into the case with the RJ-45/RJ-11 jack sticking out the front, and feed the cables through the back 3. Insert 3 of the screws through the holes in the back of the case, and thread them through the PCB 4. Screw the 3x hex nuts onto the screws to secure the PCB to the case 5. Attach the lid to the top of the case by inserting the tabs into the holes on the case body 6. Insert the 2x square nuts into the holes on the front of the case body 7. Screw the remaining 2 screws into the holes on the case top, threading them into the square nuts previously inserted in the case body. Do not overtighten!

Source: https://www.twitch.tv/videos/2314717812 Uploader: Dhalucard

Great game Source: https://www.twitch.tv/videos/22866998 Uploader: Ninja View Count: 1,534

The best-selling author, the host of The Happiness of Pursuit Podcast shares about the importance of internal marketing, his Breakout Blueprint, how to build a lifestyle business, and how to identify your passion and how to turn it into your profit center.

The best-selling author, the host of The Happiness of Pursuit Podcast shares about the importance of internal marketing, his Breakout Blueprint, how to build a lifestyle business, and how to identify your passion and how to turn it into your profit center.

Breakout Session #2: Other Future Routes

We investigate the relativistic breakout of a shock wave from the surface of a star. In this process, each fluid shell is endowed with some kinetic and thermal energy by the shock, and then continues to accelerate adiabatically by converting thermal energy into kinetic energy. This problem has been previously studied for a mildly relativistic breakout, where the acceleration ends close to the surface of the star. The current work focuses on the case where the acceleration ends at distances much greater than the radius of the star. We derive an analytic description for the hydrodynamic evolution of the ejecta in this regime, and validate it using a numerical simulation. We also provide predictions for the expected light curves and spectra from such an explosion. The relevance to astrophysical explosions is discussed, and it is shown that such events require more energy than is currently believed to result from astrophysical explosions.

Welcome back to Seasoned Sessions! This week, we discuss the ridiculous ways the press have reacted to the anticipation of Harry and Meghan's Oprah interview, and we're joined by RAY BLK, as she opens up about quarantine growth, finding love in lockdown, and the new music she has coming our way. If you want to reach out to us, email [email protected] or find us on @adaenechi and @its_hanifahh. Have a good week!

Building instructions and extras for LEGO Set 75927

Building instructions and extras for LEGO Set 75940

Building instructions and extras for LEGO Set 75940

Breakout - Go Away (Demo) Jamendo Album #084288 Tracklisting: 01 - Go Away (Instrumental Demo) Please read the Readme.txt and License.txt files for important origin and licensing information.

Breakout - Go Away (Demo) Jamendo Album #084288 Tracklisting: 01 - Go Away (Instrumental Demo) Please read the Readme.txt and License.txt files for important origin and licensing information.

Update 12/22/2018: Fixed [a bug reported by fleinze](https://www.thingiverse.com/thing:1840325/comments). Thank you! This is an enclosure for [Adafruit USB Micro-B Breakout Board Enclosure](https://www.adafruit.com/product/1833). Currently this enclosure is for direct soldering scenario only, i.e. you cannot use the enclosed header. Cable holes are designed for raw 22 AWG wires. 更新 2018/12/22: [fleinze さんから報告いただいた問題](https://www.thingiverse.com/thing:1840325/comments)を修正しました。 Adafruitの [USB Micro-B ブレイクアウトボード](https://www.adafruit.com/product/1833) のケースです。 同梱のヘッダピンを使わずに直接はんだ付けする場合を想定しています。 ケーブルの穴は 22 AWG のワイヤー用になっています。

A backup of the "Arena Breakout Wiki" wiki (database name: arenabreakoutwikiwiki ) on Miraheze , self-generated by Miraheze itself every month to honor our backups commitment.