Downloads & Free Reading Options - Results

I bought this kit for the ISP / ICSP programming: Arduino UNO ISP bzw. ICSP Programming Shield für ATtiny und ATmega - Bausatz https://www.ebay.de/itm/Arduino-UNO-ISP-bzw-ICSP-Programming-Shield-für-ATtiny-und-ATmega-Bausatz/143229762790?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 The board is put on an Arduino Uno R3 ... with the Arduino Ide (and the ArduinoISP sketch on the Uno) it works perfect for me ... first I used my own Arduino case for this: https://www.thingiverse.com/thing:3678371 Then I decided to have a standalone programming device - as a replacement for the Arduino Uno I use now the Arduino Nano soldered on a breadboard: Nano V3.0 ATmega 328 Board CH340 USB Chip Arduino Kompatibel https://www.ebay.de/itm/Nano-V3-0-ATmega-328-Board-CH340-USB-Chip-Arduino-Kompatibel/252742123829?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 PCB breadboard 30 x 70 mm (has to be shortened to 30 x 53 mm) Elegoo Double Sided PCB Kit https://www.amazon.de/Doppelseitig-Prototype-Lochrasterplatte-Verschiedene-Kompatibel/dp/B0734XYJPM/ref=sr_1_1_sspa?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=elegoo+pc&qid=1559992238&s=gateway&sr=8-1-spons&psc=1 The Arduino Nano has to be programmed with the ArduinoISP sketch - then it has to be connected to the unit via plug lines (please see pics) - you have to connect: +5V GND Reset D7, D8, D9, D10, D11 (MOSI), D12 (MISO), D13 (SCK)