Development Of A Probabilistic Dynamic Synthesis Method For The Analysis Of Nondeterministic Structures - Info and Reading Options

The Internet Archive:

Accounting for the statistical geometric and material variability of structures in analysis has been a topic of considerable research for the last 30 years. The determination of quantifiable measures of statistical probability of a desired response variable, such as natural frequency, maximum displacement, or stress, to replace experience-based ''safety factors'' has been a primary goal of these studies. There are, however, several problems associated with their satisfactory application to realistic structures, such as bladed disks in turbomachinery. These include the accurate definition of the input random variables (rv's), the large size of the finite element models frequently used to simulate these structures, which makes even a single deterministic analysis expensive, and accurate generation of the cumulative distribution function (CDF) necessary to obtain the probability of the desired response variables. The research presented here applies a methodology called probabilistic dynamic synthesis (PDS) to solve these problems. The PDS method uses dynamic characteristics of substructures measured from modal test as the input rv's, rather than ''primitive'' rv's such as material or geometric uncertainties. These dynamic characteristics, which are the free-free eigenvalues, eigenvectors, and residual flexibility (RF), are readily measured and for many substructures, a reasonable sample set of these measurements can be obtained. The statistics for these rv's accurately account for the entire random character of the substructure. Using the RF method of component mode synthesis, these dynamic characteristics are used to generate reduced-size sample models of the substructures, which are then coupled to form system models. These sample models are used to obtain the CDF of the response variable by either applying Monte Carlo simulation or by generating data points for use in the response surface reliability method, which can perform the probabilistic analysis with an order of magnitude less computational effort. Both free- and forced-response analyses have been performed, and the results indicate that, while there is considerable room for improvement, the method produces usable and more representative solutions for the design of realistic structures with a substantial savings in computer time.

Search for “Development Of A Probabilistic Dynamic Synthesis Method For The Analysis Of Nondeterministic Structures” downloads:

Visit our Downloads Search page to see if downloads are available.

Find “Development Of A Probabilistic Dynamic Synthesis Method For The Analysis Of Nondeterministic Structures” in Libraries Near You:

Read or borrow “Development Of A Probabilistic Dynamic Synthesis Method For The Analysis Of Nondeterministic Structures” from your local library.

• The WorldCat Libraries Catalog: Find a copy of “Development Of A Probabilistic Dynamic Synthesis Method For The Analysis Of Nondeterministic Structures” at a library near you.