ICICS 2017 - Info and Reading Options

"ICICS 2017" Table Of Contents:

• 1- Impact of Ball Milled Fly Ash Nano Particles on the Strength and Microstructural Characteristics of Cement Composite Mortars by L Krishnaraja, P T Ravichandran
• 2- pp01
• 3- Comparison of Trust based Protocols for MANET by S Baskaran, J Arputha Vijaya Selvi pp01
• 4- Microstructural Characterisation and Quantitative Enhancement in Strength Properties of Stabilised Soil by Divya Krishnan K, P T Ravichandran
• 5- pp02
• 6- Evaluation of Cost Effective Sewage Treatment Plant for Augmenting of Irrigation Water Supply in Sulur Small Tank in Sulur Town by Hemapriya Subramanian, Sivaraja Muthusamy
• 7- pp02
• 8- Intellectual Dynamic Source Routing Protocol to Increase the Network Lifetime by Jeba Stanly
• 9- pp03
• 10- Role of SCTP in Achieving Fair Bandwidth Allocation, Bottleneck Queuing in High Bandwidth- Delay Product Networks by Liston Deva Glindis, Nelson Kennedy Babu C
• 11- pp03
• 12- Conditional Identity Broadcast based Proxy Re-Encryption Technique for Data Encryption in Cloud by Praveen Velusamy, Balaji S, Madhankarthick R, Selvakumar J
• 13- pp04
• 14- Wireless Sensor Based on Fire Accident Avoidance System in Trains Using Zigbee Technology by Sivasakthi B, Sivaraja M
• 15- pp04
• 16- Statistical Analysis for Identifying the Significant Factors Influencing Time and Cost Overruns in Apartment Buildings by Chithra Prakash, M Sivaraja
• 17- pp05
• 18- The Use of Micro-Silica to Improve the Compressive and Flexural Strength of Concrete by Gopalakrishnan V, Sivaraja M
• 19- pp05
• 20- Comparative Study of Seven Bio Stirred Evolutionary Algorithms by K S Shanmugaraj, P Gomathi
• 21- pp06
• 22- Design of Internet Controlled Intelligent Switch by Sheelasankari M, Gomathi P
• 23- pp06
• 24- Damping Characteristics of Titanium- Titanium Boride Composite by Sivaselvan S, Sivaraja M
• 25- pp07
• 26- A Study Report on Cost, Duration and Quality Analysis of Different Formworks and Equipment’s in High-Rise Building by Sakthivel R, Sivaraja M
• 27- pp07
• 28- Effect of Welding Processes of Mechanical and Metallurgical Properties of AA6061 by Arun M, Ramachandran K
• 29- pp08
• 30- Experimental Study on Partial Replacement of Course Aggregate by Bitumen Immersed Prosopis Juliflora by Mathankumar C, Harshini S K, Prema K, Sethupathi S
• 31- pp08
• 32- Hemp Fibre Reinforced Polymer Strengthened Tubular Sections by Saravanan S M, Sivaraja M
• 33- pp09
• 34- Weldability of Commercially Pure Aluminium Alloy Using Tig Welding and Friction Stir Welding Process by Manikandan S, Sivashankar M
• 35- pp09
• 36- Risk Management in Construction Industry by Rajiv S, Sivaraja M
• 37- pp10
• 38- Mechanical and Metallurgical Characterization of Friction Stir Welding of Aluminium Alloy (6061) with High Strength Low Alloy Steel by Vignesh S, Sivaraja M
• 39- pp10
• 40- Heat Transfer and Fluid Flow Analysis in Triangular and Cylindrical-Fin and Tube Heat Exchangers with Different Shaped Vortex Generators by Ramanan R, Sivaraja M
• 41- pp11
• 42- A Step up DC-DC Converter Using ZVS Boost Integration Technique with PI and Fuzzy Controllers in PV Systems by Nalini N, Gomathi P
• 43- pp11
• 44- Expert System for Construction Consultancy Services by M Nivedhitha Manokaran, Sivaraja Muthusamy pp12
• 45- An Experimental Study on Concrete with Partial Replacement of Cement by Hypo Sludge and Fuller’s Earth by Vijayan S, Raagavi M, Saravanan S M
• 46- pp12
• 47- Hazard Assessment and Prevention Method in Centrifugal Machine by Santhosh P, Sivaselvan S, Praveenkumar M pp13
• 48- Effect of Fruit Waste and Yard Waste Using Water and Industrial Effluents in Vermicomposting Technology by Mohanasundari Somasundaram, Hemapriya Subramanian
• 49- pp13
• 50- Assessment of Effluent from Paper Industry and Nearby Well Points by Kiruthika Venugopal, Hemapriya Subramanian, Saravanan, S Mani pp14
• 51- Numerical Analysis of Insulation Wear in Cardiac Lead by Boopathy Subramanian, Gnanavel Kannian, Prabhu M Kuppusamy pp14
• 52- Comparison of Friction Stir Welding and Friction Stir Processing Using Aluminium Alloy 6061 and Aluminium Alloy 6063 by Vignesh S
• 53- pp15
• 54- Parameter Optimization of EDM Process by Response Surface Methodology in AISI 304 Stainless Steel by Gunashankar M, Mathankumar C, Karthick P, Vijay Varshidh V, Vignesh Ravi S
• 55- pp15
• 56- Analytical and Experimental Investigation on Behaviour of Steel Concrete Composite Columns by S Dhivya, R Sekar, M Nivedhitha, M Manokaran, K Krishnakumar, K Kannan
• 57- pp16
• 58- Solar Powered Automatic Irrigation System by Advanced Applications by Vignesh Mahendran, Vignesh Veeramani, Vignesh Nataraj, Prakash Murugesan, Prabhu M K pp16
• 59- Experimental Study on the Application of Polymer Modified Bitumen in the Flexible Pavement by Ashwin Sivanandhan, Prakash Ravichandran, Anitha Annadurai, Mathankumar Chokkalingam, Saravanan Mani
• 60- pp17
• 61- Experiment in EDM Process by Using Brass Electrode with Inconel in Powder Mixed Die Electric Medium by Saiyath Basha, Akbar Basha, Ranjith Kumar, Palanisamy, Sarath Babu, Sekar, Yuvaraj Anbalagan
• 62- pp17
• 63- Study on Durability Property of Polymer Modified GGBS Based Concrete Specimen by Kiruthika Selvaraj, Divya Periyasamy, Dhanushya Thangavel, Sivasakthi Balusamy
• 64- pp18
• 65- Studies on the Behaviour of Reinforced Concrete Beams Strengthened by Aramid FRP Sheets by Mukundhan M S, Vikraman P, Ramyakrishnan S, Sakthivel R
• 66- pp18
• 67- Vehicle Platooning Using Tactile Internet with 5G Technologies by Rajasekaran C, Rubini M, Kirubakaran B pp19
• 68- Experimental Study on Pet Bottle Fibre Concrete by Dinesh N, Karuppaiya A, Rajiv Gandhi S pp19
• 69- Fabrication of Bearing Cap Fixture by Sureshkumar C, Veeramani C, Shanmuganathan P, Selvakumar B pp20
• 70- Vibration Analysis of Nanoclay Reinforced Glass Fiber/Epoxy Nanocomposite by M S Senthil Kumar, Ashnafi Adugna, K Balasundaram, A Ashok Kumar
• 71- pp20
• 72- A Design to Deal with Data Partition and Aggregation in Dynamic Manner by R Angayarkanni, U Karthick, V Hemalatha, P Gomathi pp21
• 73- Time Proficient Approach for Detecting Errors by Using Scale Free System by V Hemalatha, P Gomathi pp21
• 74- Effect on Strength and Interaction Failure Behaviour of Flange and Web Plate of Cold Formed Steel Welded I-Section Columns by R Karthika
• 75- pp22
• 76- Fine Grained Categorization of Vehicle Models & Face Recognition in Accident Zone by S Suganya, J Boopala, P Gomathi
• 77- pp22
• 78- Detecting Fuzzy Duplicates in XML Data Using Bayesian Network by J Boopala, S Suganya, P Gomathi pp23
• 79- An Aggrandized Bottom-Up Clustering Method for Solving Vehicle Routing Problem by V Praveen, P Gomathi
• 80- pp23
• 81- Routing Protocol Classification and Improving QOS Metrics: A Survey by K Jothimani, P Gomathi pp24
• 82- An Efficient Heuristic Method for Solving Vehicle Routing Problem by K Pandeeswari, P Gomathi pp24
• 83- Reversible Approximate Adder Using Feynman Gate in QCA by Aravinth B, P Gomathi pp25
• 84- MMPR Based Energy Efficient Protocol Used for Wireless Co-Operative Networks by Ranjitha R, P Gomathi
• 85- pp25
• 86- DIP Based Biometrics Techniques for Security by S Poovarasan, P Gomathi pp26
• 87- Virtual Control Using MEMS Sensor by Arun Rajha V pp26
• 88- PCM based Free Cooling for an Passive Architecture by Satheeshkumar P pp27
• 89- Efficient Active Resistor Based Clock Gating Design for the Implementation of Arithmetic and Logic Circuit Design by S Baskar, P Gomathi
• 90- pp27
• 91- Car Society Formation using Cellular Automata in Vehicular Adhoc Network by Keerthika S, P Gomathi
• 92- pp28
• 93- Industrial Automation Using Locomotive Sensor for Man Machine Interface by P Dinesh, P Gomathi
• 94- pp28
• 95- More Crops per Drop in Agriculture Using Embedded System by Nivetha T, P Gomathi pp29
• 96- Analysis of Fault Tolerant Parallel FFTs against Soft Errors by Parvathi M, P Gomathi pp29
• 97- Path Tracking and Theft Identification by R Arulmani, P Gomathi pp30
• 98- Patch Antenna Based on Micro Strip for RFID Application by S Salavudeen Sait, P Gomathi pp30
• 99- Dynamic Transient Analysis in Predicting Disc Brake Squeal by Prabhu N, Satheeshkumar P, Sivaraja M pp31
• 100- Reconfigurable Wireless Sensor Network Application of Air Conditioner Controller through IoT Technique by Kalaivani S, P Gomathi
• 101- pp31
• 102- Voltage Scalable High Speed Arithmetic and Logic Unit Architecture for Processor Design by Kiruthiga S, P Gomathi
• 103- pp32
• 104- Ship Surveillance with International Boundary Scanning by G Sivapriya, P Gomathi pp32
• 105- Role of Reconfigurable Techniques in Wireless Sensor Network Applications by using FPGA with Microcontroller by B Kirubakaran, P Gomathi
• 106- pp33
• 107- Reduction of Delay and Area in Binary Comparator Using Tree-Based Techniques by Poomaran A, P Gomathi
• 108- pp33
• 109- Design of Low Power Test Pattern Generator using Buffers by Dinesh Kumar S, P Gomathi pp34
• 110- Improvement of Ergonomic Factors in a Textile Industry: A Case Study by K Balasundaram, Ashenafi Adugna, A Ashok Kumar, M S Senthil Kumar pp34
• 111- Protection Valuation from Radiation Pattern Classifiers under Plan of Attack by Sundarrajan Loganathan
• 112- pp35
• 113- Secure Attribute Based Health Monitoring Systems on IoT by Niranchana K J, Vanitha M, Muthu Lakshmi S, Jameer Basha A pp35
• 114- Effect of Surface Modification of Magnesium Alloy AZ91D by Friction Stir Processing by M K Prabhu, G Rajamurugan
• 115- pp36
• 116- Characterization of Natural Fibre Composite Using Banana and Sisal by A Yuvaraj, M K Prabhu pp36
• 117- An Experimental Study on Replacement of Cement with Fly Ash, Fine Aggregate with Graded Quarry Dust and Coarse Aggregate with Ceramic Waste Tiles in Concrete by M Suresh
• 118- pp37
• 119- Selective Harmonic Elimination PWM in Cascaded Multilevel Inverter for Harmonic Reduction by Using Controller by P Thenmozhi, P Gomathi
• 120- pp37
• 121- Blow Down Heat Recovery System Using Heat Exchanger by Sureshkumar M, Uthirakumar K, Sreshkumar C, Raja K, Sudhakar V pp38
• 122- Privacy Preserving Data Leak Detection Using Rabin Fingerprint Method by R Sathishkannan, U Karthick, P Gomathi pp38
• 123- Parametric Optimization of Ultrasonic Welding of Polyester Sheets Using Taguchi’s Design of Experiments by J Karthikeyan, M Sivaraja
• 124- pp39
• 125- Correlation between Ultrasonic Parameters, Mechanical Properties and Microstructures of Mod T91 Ferritin –Martensitic Steel (PFBR) by Ramachandran K, M Arun, M Sivaraja, Vaidehi Ganesan
• 126- pp39
• 127- A Real Time Analytical Architecture for Weather Fore Casting by U Karthick, R Sathishkannan, P Gomathi pp40
• 128- Quick Response Barcode Denoising and Deblurring Using Wiener Filter by J Stephy Graph, P Gomathi pp40
• 129- Smart Trolley System by R Kanmani, A Jameer Basha, V Roopa, S Kumar Valliappan, P Abdul Basith pp41
• 130- Smart Pollution Detection and Monitoring System in Vehicles Using Sensor and IOT by Vanmathi S, Sowbharraniga S, Suresh Kumar A
• 131- pp41
• 132- An Advent of Light-Fidelity Technology using Visible Light Communication by R Kanmani, A Jameer Basha, M Malathi
• 133- pp42
• 134- Thermal Analysis and Performance Estimation of Outer Rotor BLDC Motor with Corroded Permanent Magnets by P Arumugam, S Sutha
• 135- pp42
• 136- Analysis of Multiple Account Holders in Various Banks Using HADOOP Technology by Abishek Rajagopal, Mukundhan Lakshmanan, Gowri Sankari A, Poongodi Palaniswamy
• 137- pp43
• 138- Incorporating Virtualization in Map Reduce for Efficient Data Movement in HADOOP by K Sindhanaiselvan, P Elakkiya
• 139- pp43
• 140- Discovery and Prevention Techniques for Discrimination by T Sangeetha, K Sorna Deepika, V Srimathi pp44
• 141- Free Rider Isolation Using Aggregated Trust Model Including Weightage Considerations by P Arockia Mary, M Radhakrishnan
• 142- pp44
• 143- A Novel Approach on Learning Material Retrieval in E-Learning System by Arul Kumar V P, Ramesh P N pp45
• 144- FPGA Based Multi Rail Chopper by Using MSP 430 Processor by A Jayapal, P Manimekalai, M Gowri Shankar pp45
• 145- Accident Information System for Major Collision in Vehicles by Vigneshwaran G, Sivadhevan S, Hariprasad A, Prabhu N pp46
• 146- Water Absorption and Thickness Swelling Behaviour of Alkali Treated Bagasse Fiber Reinforced Polyester Composites by J Karthikeyan
• 147- pp46
• 148- QR Code Based Location Tracking System – A Survey by M Saranya, P Vidhyasree, K Jeyapratha, S Sabitha, S Mohanraj pp47
• 149- Car Repairing Time Estimation Using Simulations by Balaji G, Radha K, Nabeesha R pp47
• 150- An Optimistic Approach for Human Peculiarity and Gender Recollection from Stride Successions by S Rajalakshmi, S Tamilarasi, V Kavitha, K C Mohanraj, K Mohanaprakash
• 151- pp48
• 152- Direct Torque Controller Analysis in Four Phase Switched Reluctance Motor by K Nandhini, A Stephen Sagayaraj, B Saritha, T Mani
• 153- pp48
• 154- A Reconfigurable Adaptive Viterbi Decoder Using Trace back Scheme by Asir Nath, Gomathi P pp49
• 155- Monitoring Contingency Power Flow in the Smart Grid by Using Embedded System by Loganathan R, Gomathi P
• 156- pp49
• 157- Computation of Wheeling Charges Using MW-Mile Method by Gowtham Kumar R, Palanisamy T, Loganathan R pp50
• 158- Analysis and Testing of Underground Insulation for High Voltage Transmission Applications by Anand Karuppannan, Gomathi P
• 159- pp50
• 160- Generation of Sinusoidal Voltage for Grid Connected Systems Using Maximum Power Point Tracking Technique by Anand Karuppannan, Gomathi P, Palanisamy T
• 161- pp51
• 162- Design of PV Based Permanent Magnet BLDC Motor Using Submersible Pump by Sheela Sankari M, Anand Karuppannan
• 163- pp51
• 164- Design of Boost Converter for Solar based Application in Smart Cities by Gomathi P, Anand Karuppannan pp52
• 165- Comparative Analysis of Different Wheeling Charge Methodologies in Open Access Transmission System by Palanisamy T, Gomathi P
• 166- pp52
• 167- Safety Risk Assessment in CNC Machining by Suganth V G, Manikandan S pp53
• 168- Study of Health Monitoring of Steel Reinforced Concrete Beam Using Transducers by Vivekanandhan S, Suresh Manickam
• 169- pp53
• 170- Study of the Design and Remote Control of A Pneumatic Excavator by Rameshkumar S, Manikandan S pp54
• 171- Performance and Emission Analysis of Two Biodiesel Blended With Various Diesel Ratio by Sivashankar M, Vinoth Kumar V
• 172- pp54
• 173- Performance and Emission Characteristics of A 4 Stroke Diesel Engine with Mahua and Cotton Seed Biodiesel Blended with Diesel by Saravanakumar S, Sivashankar M
• 174- pp55
• 175- Optimization of Machining Parameters in Wire Cut EDM Using Taguchi Techniques by Vinoth Kumar V, Suganth V G
• 176- pp55
• 177- Experimental Investigation of Pungamia Pinnata Oil and Canola Oil Methyl Ester as Biodiesel on CI Engine by Livingstan J, Vinothkumar V
• 178- pp56
• 179- Simulation and Numerical Analysis of Energy and Power Loss Generation in Bus bar System by Prakash Murugesan, Prabhu M K
• 180- pp56
• 181- Performance of Dissimilar Welds with the Effect of Activated TIG Flux between Mild Steel and Stainless Steel by Udhayakummar A S, Karthick K
• 182- pp57
• 183- Characterization of Metal Matrix Composites Reinforced with Fly Ash by Raguraman B, Vigneshwaran M, Jeganathan M, Ramachandran K pp57
• 184- Experimental Investigation on MIG Welded Mild Steel by Satheeshkumar Ponnusamy, Prabhu Natesan, Ramachandran K pp58
• 185- Analysis and Experimental Investigation of Mechanical Vibration in Switched Reluctance Motor by Nandhini K, Gomathi P
• 186- pp58

"ICICS 2017" Description:

Read “ICICS 2017”:

Read “ICICS 2017” by choosing from the options below.